Electronic Manual jmotion

JMotion

JMotion User Manual

Checking the contents

What’s Included:

  • One (1) JMotion Wristband
  • One (1) JMotion Charging Cable
JMotion with charger

Awake/Standby mode

Tap JMotion to wake it up. If the indicator doesn't light up, please charge the device.

JMotion will automatically enter standby mode when not connected and left idle.

Charging

Attaching and Removing the JMotion Unit

a. Squeeze the left and right sides of the device (the 3 and 9 o'clock positions).

b. While squeezing, turn the device 90° counterclockwise.

c. Remove the device from the band to charge it. (Turn the JMotion Unit 90° clockwise until you hear a “click,” indicating that it is securely attached to the band.)

Charging Status: The top-right indicator light stays solid red while charging and goes out when fully charged.

Charging Time: Approximately 1 hour from completely dead to fully charged.

*Notice: This cable is exclusively for Jacfit devices. Do not use with other brands.
*Warning: Keep the cable away from magnetic objects to avoid short circuits.

Battery Life & Data Storage

A fully charged JMotion can last up to 5 days in typical usage.

In standby mode, JMotion can last up to 10 days.

Checking Battery Level

Jacfit App: You can check the JMotion's battery level on the Bluetooth connection page.

On the Device: Check the indicator light for low battery warnings. For details, please refer to the Indicator Light Guide.

ATM Ratings

3ATM

The device is splash-resistant and suitable for everyday wear. However, remove the device before showering or swimming. Avoid exposure to high temperatures, high humidity, hot tubs, saunas, or high-pressure water.

Indicator lights

Tap JMotion to check the status. The indicator light should turn off automatically after 5–6 seconds.

Status Display Description
Not Connected Slow flashing green light
Connected Solid green light
Connected to a Bike Computer Fast flashing blue light
(Motion)
Exercise 		Solid blue light
Low battery Slow flashing red light

Troubleshooting Guide

When JMotion is not connecting properly

  1. Check if JMotion has enough battery. If not, fully charge the device before reconnecting
  2. Ensure Bluetooth is enabled on your phone or tablet.
  3. Ensure Bluetooth (Nearby Devices) and Notification permissions are granted for the app.
  4. Avoid connection conflicts when changing apps. Close the previously connected app completely (swipe it away), then proceed to connect with the new app.
  5. Please tap JMotion to wake it up before reconnecting it to the app.

*If the issue persists, please reinstall the app and repeat the steps above, or contact our customer support team.

Dealing with screen lag

For screen mirroring to a TV or projector, a wired HDMI connection is recommended. Wireless mirroring may result in audio/video desync due to transmission delays.

This is a standard limitation of wireless projection technology, rather than an issue with our product or the app.

Warranty service

JACFIT provides 1-year limited warranty for repair or replacement due to manufacturing defects.
The warranty does not cover damages caused by:

  1. Improper use
  2. Rough and/or careless handling
  3. Incorrect installation
  4. Accidents, abuse and misuse
  5. Floods, fires, and natural disasters
  6. Improper, and unauthorized repair.

Proof of purchase is required for all warranty claims.

After warranty expiration, JACFIT may offer a discount on replacement or upgrade if defects are manufacturing-related.

Please deliver defective products to your retailer, or email: support@jacfit.com

Consumables (e.g., batteries) and products with removed/damaged serial numbers are not covered.

Online Auction Purchases

Online auctions are not eligible for rebates, special offers or warranty coverage.

Auction confirmations are not valid proof of purchase.

Warranty requires an original or retailer-issued receipt.

JACFIT will not replace missing parts from auction purchases.

JMotion is NOT a medical device

This product is not intended to diagnose, treat, cure, or prevent any disease. Data should only be used as a reference for personal health management. For any medical concerns, please consult a professional healthcare service.

Battery Warnings

Do not attempt to repair or replace the battery yourself. Improper replacement can cause overheating and injury. Battery components can harm the environment or human health if disposed of incorrectly. Please recycle this device at a designated lithium battery recycling location.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Federal Communication Commission (FCC) Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance.

Contact Us

Official Website: jacfit.com

Email: Support@jacfit.com

Facebook: @jacfiter

Instagram: @jacfit.us

Jacfitness App Manual (Motion Game)

How to wear

Wear the product on your right wrist and make sure the “JACFIT” logo on the JMotion unit is horizontal and facing you (Logo perpendicular to strap).

Wearing JMotion

Connecting to the app

  1. Scan the QR code on the user guide or box to download the app (Supports iOS & Android).
  2. Turn on Bluetooth and allow Bluetooth/Notification permissions. (Android users: please enable notification access.)
  3. Tap the device to wake it up, then follow the in-app pairing instructions.
  4. Before switching apps, fully close the current app first.
  5. Some games support two-player challenges using JMotion together with the JMate2 wristband.
  6. Mode Description:

    Dual-Hand Mode (Boxing):
    Wear one JMotion or JMate2 on each wrist, with the “JACFIT” or "J" logo facing you. Both devices must be used by the same player, one on each wrist.

    2-Player Mode:
    Each player wears one JMotion or JMate2 on the right wrist, with the “JACFIT” or "J" logo facing you. Two players each use one band to play the games.

*Please note: Always connect through the app, not through your phone’s Bluetooth settings.

Jacfit App Manual (Indoor Cycling)

Wearing Instructions

*JClip sold separately.

  1. Press the button on the front of the JClip to open it, then follow the instructions below to attach it to the shoelaces before putting on your shoes.
  2. Secure the JClip:

    Sports Shoes / Sneakers (Standard Shoelaces):
    With the “J” logo facing toward the toe of the shoe, snap the JClip near the upper-middle section of your shoelaces. Thread at least two rows of shoelaces through the JClip to secure it firmly in place.

    Cycling Shoes (Thin Shoelaces):
    With the “J” logo facing toward the toe of the shoe, loosen your shoelaces and thread at least two rows of shoelaces through the JClip. Make sure the front shoelace is securely seated in the upper notch of the JClip, then retighten the shoelaces and snap the JClip closed to secure it firmly in place.

  3. Attach JMotion Main Unit to JClip:

    Step 1: Squeeze the left and right sides of the JMotion unit (at the 3 and 9 o’clock positions).

    Step 2: While squeezing, rotate the device 90° counterclockwise.

    Step 3: Remove the JMotion unit from the band and insert it into the JClip.

    Step 4: Rotate the JMotion unit 90° clockwise until you hear a “click,” indicating that it is securely attached to the JClip.

    Step 5: Make sure “JACFIT” is horizontal and facing the toe of the shoe.

Connecting to the app

  1. Scan the QR code on the user guide or box to download the app (Supports iOS & Android).
  2. Turn on Bluetooth and allow Bluetooth/Notification permissions. (Android users: please enable notification access.)
  3. Tap the device to wake it up, then follow the in-app pairing instructions.
  4. Before switching apps, fully close the current app first.

*Please note: Always connect through the app, not through your phone’s Bluetooth settings.

Jacfit Plus App Manual (Outdoor Cycling)

Wearing Instructions

*JClip sold separately.

  1. Press the button on the front of the JClip to open it, then follow the instructions below to attach it to the shoelaces before putting on your shoes.
  2. Secure the JClip:

    Sports Shoes / Sneakers (Standard Shoelaces):
    With the “J” logo facing toward the toe of the shoe, snap the JClip near the upper-middle section of your shoelaces. Thread at least two rows of shoelaces through the JClip to secure it firmly in place.

    Cycling Shoes (Thin Shoelaces):
    With the “J” logo facing toward the toe of the shoe, loosen your shoelaces and thread at least two rows of shoelaces through the JClip. Make sure the front shoelace is securely seated in the upper notch of the JClip, then retighten the shoelaces and snap the JClip closed to secure it firmly in place.

  3. Attach JMotion Main Unit to JClip:

    Step 1: Squeeze the left and right sides of the JMotion unit (at the 3 and 9 o’clock positions).

    Step 2: While squeezing, rotate the device 90° counterclockwise.

    Step 3: Remove the JMotion unit from the band and insert it into the JClip.

    Step 4: Rotate the JMotion unit 90° clockwise until you hear a “click,” indicating that it is securely attached to the JClip.

    Step 5: Make sure “JACFIT” is horizontal and facing the toe of the shoe.

How to Pair with a Bike Computer (Cadence Supported)

  1. Ensure that your bike computer is equipped with Bluetooth connectivity.
  2. Pair and connect your JMotion main unit with the Jacfit Plus app.
  3. Once connected to the Jacfit Plus app, go to Settings > Devices > tap on "JMotion", and select "Enable Bluetooth Visibility". The app will automatically close.
  4. Tap to wake up the device, then search for JMotion on your bike computer.
  5. Once paired with the bike computer, the device indicator will show a fast flashing blue light pattern.

*Note: To reconnect the JMotion main unit to the app, please disconnect it from your bike computer first and then re-pair it inside the app to prevent connection conflicts.

Connecting to the app

  1. Scan the QR code on the user guide or box to download the app (Supports iOS & Android).
  2. Turn on Bluetooth and allow Bluetooth/Notification permissions. (Android users: please enable notification access.)
  3. Tap the device to wake it up, then follow the in-app pairing instructions, and select Outdoor Cycling mode.
  4. Before switching apps, fully close the current app first.

*Please note: Always connect through the app, not through your phone’s Bluetooth settings.

Language / 語言

Product
JMate2
JMate2 Manual
JClip
JClip Manual